1 Basics

Status: Tech Preview
Architecture(s): Intel x86
Component(s): Hypervisor, toolstack
Hardware: L3 CAT: Haswell and beyond CPUs CDP : Broadwell and beyond CPUs L2 CAT: Atom codename Goldmont and beyond CPUs

2 Terminology

3 Overview

Intel provides a set of allocation capabilities including Cache Allocatation Technology (CAT) and Code and Data Prioritization (CDP).

CAT allows an OS or hypervisor to control allocation of a CPU's shared cache based on application/domain priority or Class of Service (COS). Each COS is configured using capacity bitmasks (CBMs) which represent cache capacity and indicate the degree of overlap and isolation between classes. Once CAT is co- nfigured, the processor allows access to portions of cache according to the established COS. Intel Xeon processor E5 v4 family (and some others) introduce capabilities to configure and make use of the CAT mechanism on the L3 cache. Intel Goldmont processor provides support for control over the L2 cache.

Code and Data Prioritization (CDP) Technology is an extension of CAT. CDP enables isolation and separate prioritization of code and data fetches to the L3 cache in a SW configurable manner, which can enable workload priorit- ization and tuning of cache capacity to the characteristics of the workload. CDP extends CAT by providing separate code and data masks per Class of Service (COS). When SW configures to enable CDP, L3 CAT is disabled.

4 User details

Add "psr=cat" to boot line parameter to enable all supported level CAT featu- res. Add "psr=cdp" to enable L3 CDP but disables L3 CAT by SW.

  1. psr-cat-show [OPTIONS] domain-id:

    Show L2 CAT or L3 CAT/CDP CBM of the domain designated by Xen domain-id.

    Option -l: -l2: Show cbm for L2 cache. -l3: Show cbm for L3 cache.

    If -lX is specified and LX is not supported, print error. If no -l is specified, level 3 is the default option.

  2. psr-cat-set [OPTIONS] domain-id cbm:

    Set L2 CAT or L3 CAT/CDP CBM to the domain designated by Xen domain-id.

    Option -s: Specify the socket to process, otherwise all sockets are processed.

    Option -l: -l2: Specify cbm for L2 cache. -l3: Specify cbm for L3 cache.

    If -lX is specified and LX is not supported, print error. If no -l is specified, level 3 is the default option.

    Option -c or -d: -c: Set L3 CDP code cbm. -d: Set L3 CDP data cbm.

  3. psr-hwinfo [OPTIONS]:

    Show CMT & L2 CAT & L3 CAT/CDP HW information on every socket.

    Option -m, --cmt: Show Cache Monitoring Technology (CMT) hardware info.

    Option -a, --cat: Show CAT/CDP hardware info.

5 Technical details

L3 CAT/CDP and L2 CAT are all members of Intel PSR features, they share the base PSR infrastructure in Xen.

5.1 Hardware perspective

CAT/CDP defines a range of MSRs to assign different cache access patterns which are known as CBMs, each CBM is associated with a COS.

E.g. L2 CAT: +----------------------------+----------------+ IA32_PQR_ASSOC | MSR (per socket) | Address | +----+---+-------+ +----------------------------+----------------+ | |COS| | | IA32_L2_QOS_MASK_0 | 0xD10 | +----+---+-------+ +----------------------------+----------------+ +-------------> | ... | ... | +----------------------------+----------------+ | IA32_L2_QOS_MASK_n | 0xD10+n (n<64) | +----------------------------+----------------+

L3 CAT/CDP uses a range of MSRs from 0xC90 ~ 0xC90+n (n<128).

L2 CAT uses a range of MSRs from 0xD10 ~ 0xD10+n (n<64), following the L3 CAT/CDP MSRs, setting different L2 cache accessing patterns from L3 cache is supported.

Every MSR stores a CBM value. A capacity bitmask (CBM) provides a hint to the hardware indicating the cache space a domain should be limited to as well as providing an indication of overlap and isolation in the CAT-capable cache from other domains contending for the cache.

Sample cache capacity bitmasks for a bitlength of 8 are shown below. Please note that all (and only) contiguous '1' combinations are allowed (e.g. FFFFH, 0FF0H, 003CH, etc.).

``` +----+----+----+----+----+----+----+----+ | M7 | M6 | M5 | M4 | M3 | M2 | M1 | M0 | +----+----+----+----+----+----+----+----+ COS0 | A | A | A | A | A | A | A | A | Default Bitmask +----+----+----+----+----+----+----+----+ COS1 | A | A | A | A | A | A | A | A | +----+----+----+----+----+----+----+----+ COS2 | A | A | A | A | A | A | A | A | +----+----+----+----+----+----+----+----+

   | M7 | M6 | M5 | M4 | M3 | M2 | M1 | M0 |

COS0 | A | A | A | A | A | A | A | A | Overlapped Bitmask +----+----+----+----+----+----+----+----+ COS1 | | | | | A | A | A | A | +----+----+----+----+----+----+----+----+ COS2 | | | | | | | A | A | +----+----+----+----+----+----+----+----+

   | M7 | M6 | M5 | M4 | M3 | M2 | M1 | M0 |

COS0 | A | A | A | A | | | | | Isolated Bitmask +----+----+----+----+----+----+----+----+ COS1 | | | | | A | A | | | +----+----+----+----+----+----+----+----+ COS2 | | | | | | | A | A | +----+----+----+----+----+----+----+----+ ```

We can get the CBM length through CPUID. The default value of CBM is calcul- ated by (1ull << cbm_len) - 1. That is a fully open bitmask, all ones bitm- ask. The COS[0] always stores the default value without change.

There is a IA32_PQR_ASSOC register which stores the COS ID of the VCPU. HW enforces cache allocation according to the corresponding CBM.

5.2 The relationship between L3 CAT/CDP and L2 CAT

HW may support all features. By default, CDP is disabled on the processor. If the L3 CAT MSRs are used without enabling CDP, the processor operates in a traditional CAT-only mode. When CDP is enabled: * the CAT mask MSRs are re-mapped into interleaved pairs of mask MSRs for data or code fetches. * the range of COS for CAT is re-indexed, with the lower-half of the COS range available for CDP.

L2 CAT is independent of L3 CAT/CDP, which means L2 CAT can be enabled while L3 CAT/CDP is disabled, or L2 CAT and L3 CAT/CDP are both enabled.

As a requirement, the bits of CBM of CAT/CDP must be continuous.

N.B. L2 CAT and L3 CAT/CDP share the same COS field in the same associate register IA32_PQR_ASSOC, which means one COS is associated with a pair of L2 CAT CBM and L3 CAT/CDP CBM.

Besides, the max COS of L2 CAT may be different from L3 CAT/CDP (or other PSR features in future). In some cases, a domain is permitted to have a COS that is beyond one (or more) of PSR features but within the others. For instance, let's assume the max COS of L2 CAT is 8 but the max COS of L3 CAT is 16, when a domain is assigned 9 as COS, the L3 CAT CBM associated to COS 9 would be enforced, but for L2 CAT, the HW works as default value is set since COS 9 is beyond the max COS (8) of L2 CAT.

5.3 Design Overview

When enforcing CAT/CDP, all cores of domains have the same default COS (COS0) which is associated with the fully open CBM (all ones bitmask) to access all cache. The default COS is used only in hypervisor and is transparent to tool stack and user.

System administrator can change PSR allocation policy at runtime by tool stack. Since L2 CAT shares COS with L3 CAT/CDP, a COS corresponds to a 2-tuple, like [L2 CBM, L3 CBM] with only-CAT enabled, when CDP is enabled, one COS correspo- nds to a 3-tuple, like [L2 CBM, L3 Code_CBM, L3 Data_CBM]. If neither L3 CAT nor L3 CDP is enabled, things would be easier, one COS corresponds to one L2 CBM.

When context switch happens, the COS of VCPU is written to per-thread MSR IA32_PQR_ASSOC, and then hardware enforces cache allocation according to the corresponding CBM.

Different sockets may have different CAT/CDP capability (e.g. max COS) alth- ough it is consistent on the same socket. So the capability of per-socket CAT/ CDP is specified.

'psr-cat-set' can set CBM for one domain per socket. On each socket, we main- tain a COS array for all domains. One domain uses one COS at one time. One COS stores the CBM of the domain to work. So, when a VCPU of the domain is migrat- ed from socket 1 to socket 2, it follows configuration on socket 2.

E.g. user sets domain 1 CBM on socket 1 to 0x7f which uses COS 9 but sets do- main 1 CBM on socket 2 to 0x3f which uses COS 7. When VCPU of this domain is migrated from socket 1 to 2, the COS ID used is 7, that means 0x3f is the CBM to work for this domain 1 now.

5.4 Implementation Description

  1. Boot line parameter "psr=cat" enables L2 CAT and L3 CAT if hardware suppo- rted. "psr=cdp" enables CDP if hardware supported.

  2. SYSCTL: - XEN_SYSCTL_PSR_CAT_get_l3_info: Get L3 CAT/CDP information. - XEN_SYSCTL_PSR_CAT_get_l2_info: Get L2 CAT information.

  3. DOMCTL: - XEN_DOMCTL_PSR_CAT_OP_GET_L3_CBM: Get L3 CBM for a domain. - XEN_DOMCTL_PSR_CAT_OP_SET_L3_CBM: Set L3 CBM for a domain. - XEN_DOMCTL_PSR_CAT_OP_GET_L3_CODE: Get CDP Code CBM for a domain. - XEN_DOMCTL_PSR_CAT_OP_SET_L3_CODE: Set CDP Code CBM for a domain. - XEN_DOMCTL_PSR_CAT_OP_GET_L3_DATA: Get CDP Data CBM for a domain. - XEN_DOMCTL_PSR_CAT_OP_SET_L3_DATA: Set CDP Data CBM for a domain. - XEN_DOMCTL_PSR_CAT_OP_GET_L2_CBM: Get L2 CBM for a domain. - XEN_DOMCTL_PSR_CAT_OP_SET_L2_CBM: Set L2 CBM for a domain.

  1. psr-cat-show -lX domain-id Show LX cbm for a domain. => XEN_SYSCTL_PSR_CAT_get_l3_info / XEN_SYSCTL_PSR_CAT_get_l2_info / XEN_DOMCTL_PSR_CAT_OP_GET_L3_CBM / XEN_DOMCTL_PSR_CAT_OP_GET_L3_CODE / XEN_DOMCTL_PSR_CAT_OP_GET_L3_DATA / XEN_DOMCTL_PSR_CAT_OP_GET_L2_CBM


  3. psr-hwinfo Show PSR HW information, including L3 CAT/CDP/L2 CAT => XEN_SYSCTL_PSR_CAT_get_l3_info / XEN_SYSCTL_PSR_CAT_get_l2_info

  1. Feature properties

    static const struct feat_props { unsigned int cos_num; enum cbm_type type[PSR_MAX_COS_NUM]; enum cbm_type alt_type; bool (*get_feat_info)(const struct feat_node *feat, uint32_t data[], unsigned int array_len); void (*write_msr)(unsigned int cos, uint32_t val, enum cbm_type type); } *feat_props[PSR_SOCKET_FEAT_NUM];

    Every feature has its own properties, e.g. some data and actions. A feature property pointer array is declared to save every feature's properties.

  2. Feature node

    struct feat_node { unsigned int cos_max; unsigned int cbm_len; uint32_t cos_reg_val[MAX_COS_REG_CNT]; };

    When a PSR enforcement feature is enabled, it will be added into a feature array.

  3. Per-socket PSR features information structure

    struct psr_socket_info { bool feat_init; struct feat_node *features[PSR_SOCKET_FEAT_NUM]; spinlock_t ref_lock; unsigned int cos_ref[MAX_COS_REG_CNT]; DECLARE_BITMAP(dom_ids, DOMID_IDLE + 1); };

    We collect all PSR allocation features information of a socket in this struct psr_socket_info.

6 Limitations

CAT/CDP can only work on HW which enables it(check by CPUID). So far, there is no HW which enables both L2 CAT and L3 CAT/CDP. But SW implementation has cons- idered such scenario to enable both L2 CAT and L3 CAT/CDP.

7 Testing

We can execute above xl commands to verify L2 CAT and L3 CAT/CDP on different HWs support them.

For example: root@:~$ xl psr-hwinfo --cat Cache Allocation Technology (CAT): L2 Socket ID : 0 Maximum COS : 3 CBM length : 8 Default CBM : 0xff

root@:~$ xl psr-cat-cbm-set -l2 1 0x7f

root@:~$ xl psr-cat-show -l2 1
Socket ID       : 0
Default CBM     : 0xff
   ID                     NAME             CBM
    1                 ubuntu14            0x7f

8 Areas for improvement

A hexadecimal number is used to set/show CBM for a domain now. Although this is convenient to cover overlap/isolated bitmask requirement, it is not user- friendly.

To improve this, the libxl interfaces can be wrapped in libvirt to provide more usr-friendly interfaces to user, e.g. a percentage number of the cache to set and show.

9 Known issues


10 References

"INTEL RESOURCE DIRECTOR TECHNOLOGY (INTEL RDT) ALLOCATION FEATURES" Intel 64 and IA-32 Architectures Software Developer Manuals, vol3

11 History

Date Revision Version Notes

2016-08-12 1.0 Xen 4.9 Design document written 2017-02-13 1.7 Xen 4.9 Changes: 1. Modify the design document to cover L3 CAT/CDP and L2 CAT; 2. Fix typos; 3. Amend description of feat_mask to make it clearer; 4. Other minor changes. 2017-02-15 1.8 Xen 4.9 Changes: 1. Add content in 'Areas for improvement'; 2. Adjust revision number. 2017-03-16 1.9 Xen 4.9 Changes: 1. Add 'CMT' in 'Terminology'; 2. Change 'feature list' to 'feature array'. 3. Modify data structure descriptions. 4. Adjust revision number. 2017-05-03 1.11 Xen 4.9 Changes: 1. Modify data structure descriptions. 2. Adjust revision number. 2017-07-13 1.14 Xen 4.10 Changes: 1. Fix a typo. 2017-08-01 1.15 Xen 4.10 Changes: 1. Add 'alt_type' in 'feat_props' structure. 2017-08-04 1.16 Xen 4.10 Changes: 1. Remove special character which may cause html creation failure. ---------- -------- -------- -------------------------------------------