Coverage Report

Created: 2017-10-25 09:10

/root/src/xen/xen/include/acpi/actbl.h
Line
Count
Source (jump to first uncovered line)
1
/******************************************************************************
2
 *
3
 * Name: actbl.h - Basic ACPI Table Definitions
4
 *
5
 *****************************************************************************/
6
7
/*
8
 * Copyright (C) 2000 - 2011, Intel Corp.
9
 * All rights reserved.
10
 *
11
 * Redistribution and use in source and binary forms, with or without
12
 * modification, are permitted provided that the following conditions
13
 * are met:
14
 * 1. Redistributions of source code must retain the above copyright
15
 *    notice, this list of conditions, and the following disclaimer,
16
 *    without modification.
17
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18
 *    substantially similar to the "NO WARRANTY" disclaimer below
19
 *    ("Disclaimer") and any redistribution must be conditioned upon
20
 *    including a substantially similar Disclaimer requirement for further
21
 *    binary redistribution.
22
 * 3. Neither the names of the above-listed copyright holders nor the names
23
 *    of any contributors may be used to endorse or promote products derived
24
 *    from this software without specific prior written permission.
25
 *
26
 * Alternatively, this software may be distributed under the terms of the
27
 * GNU General Public License ("GPL") version 2 as published by the Free
28
 * Software Foundation.
29
 *
30
 * NO WARRANTY
31
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41
 * POSSIBILITY OF SUCH DAMAGES.
42
 */
43
44
#ifndef __ACTBL_H__
45
#define __ACTBL_H__
46
47
/*******************************************************************************
48
 *
49
 * Fundamental ACPI tables
50
 *
51
 * This file contains definitions for the ACPI tables that are directly consumed
52
 * by ACPICA. All other tables are consumed by the OS-dependent ACPI-related
53
 * device drivers and other OS support code.
54
 *
55
 * The RSDP and FACS do not use the common ACPI table header. All other ACPI
56
 * tables use the header.
57
 *
58
 ******************************************************************************/
59
60
/*
61
 * Values for description table header signatures for tables defined in this
62
 * file. Useful because they make it more difficult to inadvertently type in
63
 * the wrong signature.
64
 */
65
#define ACPI_SIG_DSDT           "DSDT"  /* Differentiated System Description Table */
66
#define ACPI_SIG_FADT           "FACP"  /* Fixed ACPI Description Table */
67
#define ACPI_SIG_FACS           "FACS"  /* Firmware ACPI Control Structure */
68
#define ACPI_SIG_PSDT           "PSDT"  /* Persistent System Description Table */
69
#define ACPI_SIG_RSDP           "RSD PTR "  /* Root System Description Pointer */
70
#define ACPI_SIG_RSDT           "RSDT"  /* Root System Description Table */
71
#define ACPI_SIG_XSDT           "XSDT"  /* Extended  System Description Table */
72
#define ACPI_SIG_SSDT           "SSDT"  /* Secondary System Description Table */
73
#define ACPI_RSDP_NAME          "RSDP"  /* Short name for RSDP, not signature */
74
75
/*
76
 * All tables and structures must be byte-packed to match the ACPI
77
 * specification, since the tables are provided by the system BIOS
78
 */
79
#pragma pack(1)
80
81
/*
82
 * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
83
 * This is the only type that is even remotely portable. Anything else is not
84
 * portable, so do not use any other bitfield types.
85
 */
86
87
/*******************************************************************************
88
 *
89
 * Master ACPI Table Header. This common header is used by all ACPI tables
90
 * except the RSDP and FACS.
91
 *
92
 ******************************************************************************/
93
94
struct acpi_table_header {
95
  char signature[ACPI_NAME_SIZE]; /* ASCII table signature */
96
  u32 length;   /* Length of table in bytes, including this header */
97
  u8 revision;    /* ACPI Specification minor version # */
98
  u8 checksum;    /* To make sum of entire table == 0 */
99
  char oem_id[ACPI_OEM_ID_SIZE];  /* ASCII OEM identification */
100
  char oem_table_id[ACPI_OEM_TABLE_ID_SIZE];  /* ASCII OEM table identification */
101
  u32 oem_revision; /* OEM revision number */
102
  char asl_compiler_id[ACPI_NAME_SIZE]; /* ASCII ASL compiler vendor ID */
103
  u32 asl_compiler_revision;  /* ASL compiler version */
104
};
105
106
/*******************************************************************************
107
 *
108
 * GAS - Generic Address Structure (ACPI 2.0+)
109
 *
110
 * Note: Since this structure is used in the ACPI tables, it is byte aligned.
111
 * If misaliged access is not supported by the hardware, accesses to the
112
 * 64-bit Address field must be performed with care.
113
 *
114
 ******************************************************************************/
115
116
struct acpi_generic_address {
117
  u8 space_id;    /* Address space where struct or register exists */
118
  u8 bit_width;   /* Size in bits of given register */
119
  u8 bit_offset;    /* Bit offset within the register */
120
  u8 access_width;  /* Minimum Access size (ACPI 3.0) */
121
  u64 address;    /* 64-bit address of struct or register */
122
};
123
124
/*******************************************************************************
125
 *
126
 * RSDP - Root System Description Pointer (Signature is "RSD PTR ")
127
 *        Version 2
128
 *
129
 ******************************************************************************/
130
131
struct acpi_table_rsdp {
132
  char signature[8];  /* ACPI signature, contains "RSD PTR " */
133
  u8 checksum;    /* ACPI 1.0 checksum */
134
  char oem_id[ACPI_OEM_ID_SIZE];  /* OEM identification */
135
  u8 revision;    /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */
136
  u32 rsdt_physical_address;  /* 32-bit physical address of the RSDT */
137
  u32 length;   /* Table length in bytes, including header (ACPI 2.0+) */
138
  u64 xsdt_physical_address;  /* 64-bit physical address of the XSDT (ACPI 2.0+) */
139
  u8 extended_checksum; /* Checksum of entire table (ACPI 2.0+) */
140
  u8 reserved[3];   /* Reserved, must be zero */
141
};
142
143
#define ACPI_RSDP_REV0_SIZE     20  /* Size of original ACPI 1.0 RSDP */
144
145
/*******************************************************************************
146
 *
147
 * RSDT/XSDT - Root System Description Tables
148
 *             Version 1 (both)
149
 *
150
 ******************************************************************************/
151
152
struct acpi_table_rsdt {
153
  struct acpi_table_header header;  /* Common ACPI table header */
154
  u32 table_offset_entry[1];  /* Array of pointers to ACPI tables */
155
};
156
157
struct acpi_table_xsdt {
158
  struct acpi_table_header header;  /* Common ACPI table header */
159
  u64 table_offset_entry[1];  /* Array of pointers to ACPI tables */
160
};
161
162
/*******************************************************************************
163
 *
164
 * FACS - Firmware ACPI Control Structure (FACS)
165
 *
166
 ******************************************************************************/
167
168
struct acpi_table_facs {
169
  char signature[4];  /* ASCII table signature */
170
  u32 length;   /* Length of structure, in bytes */
171
  u32 hardware_signature; /* Hardware configuration signature */
172
  u32 firmware_waking_vector; /* 32-bit physical address of the Firmware Waking Vector */
173
  u32 global_lock;  /* Global Lock for shared hardware resources */
174
  u32 flags;
175
  u64 xfirmware_waking_vector;  /* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */
176
  u8 version;   /* Version of this table (ACPI 2.0+) */
177
  u8 reserved[3];   /* Reserved, must be zero */
178
  u32 ospm_flags;   /* Flags to be set by OSPM (ACPI 4.0) */
179
  u8 reserved1[24]; /* Reserved, must be zero */
180
};
181
182
/* Masks for global_lock flag field above */
183
184
#define ACPI_GLOCK_PENDING          (1) /* 00: Pending global lock ownership */
185
#define ACPI_GLOCK_OWNED            (1<<1)  /* 01: Global lock is owned */
186
187
/* Masks for Flags field above  */
188
189
#define ACPI_FACS_S4_BIOS_PRESENT   (1) /* 00: S4BIOS support is present */
190
#define ACPI_FACS_64BIT_WAKE        (1<<1)  /* 01: 64-bit wake vector supported (ACPI 4.0) */
191
192
/* Masks for ospm_flags field above */
193
194
#define ACPI_FACS_64BIT_ENVIRONMENT (1) /* 00: 64-bit wake environment is required (ACPI 4.0) */
195
196
/*******************************************************************************
197
 *
198
 * FADT - Fixed ACPI Description Table (Signature "FACP")
199
 *        Version 4
200
 *
201
 ******************************************************************************/
202
203
/* Fields common to all versions of the FADT */
204
205
struct acpi_table_fadt {
206
  struct acpi_table_header header;  /* Common ACPI table header */
207
  u32 facs;   /* 32-bit physical address of FACS */
208
  u32 dsdt;   /* 32-bit physical address of DSDT */
209
  u8 model;   /* System Interrupt Model (ACPI 1.0) - not used in ACPI 2.0+ */
210
  u8 preferred_profile; /* Conveys preferred power management profile to OSPM. */
211
  u16 sci_interrupt;  /* System vector of SCI interrupt */
212
  u32 smi_command;  /* 32-bit Port address of SMI command port */
213
  u8 acpi_enable;   /* Value to write to smi_cmd to enable ACPI */
214
  u8 acpi_disable;  /* Value to write to smi_cmd to disable ACPI */
215
  u8 S4bios_request;  /* Value to write to SMI CMD to enter S4BIOS state */
216
  u8 pstate_control;  /* Processor performance state control */
217
  u32 pm1a_event_block; /* 32-bit Port address of Power Mgt 1a Event Reg Blk */
218
  u32 pm1b_event_block; /* 32-bit Port address of Power Mgt 1b Event Reg Blk */
219
  u32 pm1a_control_block; /* 32-bit Port address of Power Mgt 1a Control Reg Blk */
220
  u32 pm1b_control_block; /* 32-bit Port address of Power Mgt 1b Control Reg Blk */
221
  u32 pm2_control_block;  /* 32-bit Port address of Power Mgt 2 Control Reg Blk */
222
  u32 pm_timer_block; /* 32-bit Port address of Power Mgt Timer Ctrl Reg Blk */
223
  u32 gpe0_block;   /* 32-bit Port address of General Purpose Event 0 Reg Blk */
224
  u32 gpe1_block;   /* 32-bit Port address of General Purpose Event 1 Reg Blk */
225
  u8 pm1_event_length;  /* Byte Length of ports at pm1x_event_block */
226
  u8 pm1_control_length;  /* Byte Length of ports at pm1x_control_block */
227
  u8 pm2_control_length;  /* Byte Length of ports at pm2_control_block */
228
  u8 pm_timer_length; /* Byte Length of ports at pm_timer_block */
229
  u8 gpe0_block_length; /* Byte Length of ports at gpe0_block */
230
  u8 gpe1_block_length; /* Byte Length of ports at gpe1_block */
231
  u8 gpe1_base;   /* Offset in GPE number space where GPE1 events start */
232
  u8 cst_control;   /* Support for the _CST object and C States change notification */
233
  u16 C2latency;    /* Worst case HW latency to enter/exit C2 state */
234
  u16 C3latency;    /* Worst case HW latency to enter/exit C3 state */
235
  u16 flush_size;   /* Processor's memory cache line width, in bytes */
236
  u16 flush_stride; /* Number of flush strides that need to be read */
237
  u8 duty_offset;   /* Processor duty cycle index in processor's P_CNT reg */
238
  u8 duty_width;    /* Processor duty cycle value bit width in P_CNT register */
239
  u8 day_alarm;   /* Index to day-of-month alarm in RTC CMOS RAM */
240
  u8 month_alarm;   /* Index to month-of-year alarm in RTC CMOS RAM */
241
  u8 century;   /* Index to century in RTC CMOS RAM */
242
  u16 boot_flags;   /* IA-PC Boot Architecture Flags (see below for individual flags) */
243
  u8 reserved;    /* Reserved, must be zero */
244
  u32 flags;    /* Miscellaneous flag bits (see below for individual flags) */
245
  struct acpi_generic_address reset_register; /* 64-bit address of the Reset register */
246
  u8 reset_value;   /* Value to write to the reset_register port to reset the system */
247
  u16 arm_boot_flags;     /* ARM-Specific Boot Flags (see below for individual flags) (ACPI 5.1) */
248
  u8 minor_revision;      /* FADT Minor Revision (ACPI 5.1) */
249
  u64 Xfacs;    /* 64-bit physical address of FACS */
250
  u64 Xdsdt;    /* 64-bit physical address of DSDT */
251
  struct acpi_generic_address xpm1a_event_block;  /* 64-bit Extended Power Mgt 1a Event Reg Blk address */
252
  struct acpi_generic_address xpm1b_event_block;  /* 64-bit Extended Power Mgt 1b Event Reg Blk address */
253
  struct acpi_generic_address xpm1a_control_block;  /* 64-bit Extended Power Mgt 1a Control Reg Blk address */
254
  struct acpi_generic_address xpm1b_control_block;  /* 64-bit Extended Power Mgt 1b Control Reg Blk address */
255
  struct acpi_generic_address xpm2_control_block; /* 64-bit Extended Power Mgt 2 Control Reg Blk address */
256
  struct acpi_generic_address xpm_timer_block;  /* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */
257
  struct acpi_generic_address xgpe0_block;  /* 64-bit Extended General Purpose Event 0 Reg Blk address */
258
  struct acpi_generic_address xgpe1_block;  /* 64-bit Extended General Purpose Event 1 Reg Blk address */
259
  struct acpi_generic_address sleep_control;  /* 64-bit Sleep Control register */
260
  struct acpi_generic_address sleep_status; /* 64-bit Sleep Status register */
261
  u64 hypervisor_id;      /* Hypervisor Vendor ID (ACPI 6.0) */
262
};
263
264
/* Masks for FADT IA-PC Boot Architecture Flags (boot_flags) */
265
266
#define ACPI_FADT_LEGACY_DEVICES    (1)   /* 00: [V2] System has LPC or ISA bus devices */
267
#define ACPI_FADT_8042              (1<<1)  /* 01: [V3] System has an 8042 controller on port 60/64 */
268
#define ACPI_FADT_NO_VGA            (1<<2)  /* 02: [V4] It is not safe to probe for VGA hardware */
269
1
#define ACPI_FADT_NO_MSI            (1<<3)  /* 03: [V4] Message Signaled Interrupts (MSI) must not be enabled */
270
#define ACPI_FADT_NO_ASPM           (1<<4)  /* 04: [V4] PCIe ASPM control must not be enabled */
271
#define ACPI_FADT_NO_CMOS_RTC       (1<<5)  /* 05: [V5] No CMOS real-time clock present */
272
273
#define FADT2_REVISION_ID               3
274
275
/* Masks for FADT ARM Boot Architecture Flags (arm_boot_flags) ACPI 5.1 */
276
277
#define ACPI_FADT_PSCI_COMPLIANT    (1)        /* 00:  [V5+] PSCI 0.2+ is implemented */
278
#define ACPI_FADT_PSCI_USE_HVC      (1<<1)     /* 01:  [V5+] HVC must be used instead of SMC as the PSCI conduit */
279
280
/* Masks for FADT flags */
281
282
0
#define ACPI_FADT_WBINVD            (1)  /* 00: [V1] The wbinvd instruction works properly */
283
#define ACPI_FADT_WBINVD_FLUSH      (1<<1)  /* 01: [V1] wbinvd flushes but does not invalidate caches */
284
#define ACPI_FADT_C1_SUPPORTED      (1<<2)  /* 02: [V1] All processors support C1 state */
285
#define ACPI_FADT_C2_MP_SUPPORTED   (1<<3)  /* 03: [V1] C2 state works on MP system */
286
#define ACPI_FADT_POWER_BUTTON      (1<<4)  /* 04: [V1] Power button is handled as a control method device */
287
#define ACPI_FADT_SLEEP_BUTTON      (1<<5)  /* 05: [V1] Sleep button is handled as a control method device */
288
#define ACPI_FADT_FIXED_RTC         (1<<6)  /* 06: [V1] RTC wakeup status not in fixed register space */
289
#define ACPI_FADT_S4_RTC_WAKE       (1<<7)  /* 07: [V1] RTC alarm can wake system from S4 */
290
0
#define ACPI_FADT_32BIT_TIMER       (1<<8)  /* 08: [V1] ACPI timer width is 32-bit (0=24-bit) */
291
#define ACPI_FADT_DOCKING_SUPPORTED (1<<9)  /* 09: [V1] Docking supported */
292
0
#define ACPI_FADT_RESET_REGISTER    (1<<10)  /* 10: [V2] System reset via the FADT RESET_REG supported */
293
#define ACPI_FADT_SEALED_CASE       (1<<11) /* 11: [V3] No internal expansion capabilities and case is sealed */
294
#define ACPI_FADT_HEADLESS          (1<<12) /* 12: [V3] No local video capabilities or local input devices */
295
#define ACPI_FADT_SLEEP_TYPE        (1<<13) /* 13: [V3] Must execute native instruction after writing  SLP_TYPx register */
296
#define ACPI_FADT_PCI_EXPRESS_WAKE  (1<<14) /* 14: [V4] System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */
297
#define ACPI_FADT_PLATFORM_CLOCK    (1<<15) /* 15: [V4] OSPM should use platform-provided timer (ACPI 3.0) */
298
#define ACPI_FADT_S4_RTC_VALID      (1<<16) /* 16: [V4] Contents of RTC_STS valid after S4 wake (ACPI 3.0) */
299
#define ACPI_FADT_REMOTE_POWER_ON   (1<<17) /* 17: [V4] System is compatible with remote power on (ACPI 3.0) */
300
2
#define ACPI_FADT_APIC_CLUSTER      (1<<18)  /* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */
301
3
#define ACPI_FADT_APIC_PHYSICAL     (1<<19)  /* 19: [V4] All local x_aPICs must use physical dest mode (ACPI 3.0) */
302
#define ACPI_FADT_HW_REDUCED        (1<<20) /* 20: [V5] ACPI hardware is not implemented (ACPI 5.0) */
303
#define ACPI_FADT_LOW_POWER_S0      (1<<21) /* 21: [V5] S0 power savings are equal or better than S3 (ACPI 5.0) */
304
305
/* Values for preferred_profile (Preferred Power Management Profiles) */
306
307
enum acpi_prefered_pm_profiles {
308
  PM_UNSPECIFIED = 0,
309
  PM_DESKTOP = 1,
310
  PM_MOBILE = 2,
311
  PM_WORKSTATION = 3,
312
  PM_ENTERPRISE_SERVER = 4,
313
  PM_SOHO_SERVER = 5,
314
  PM_APPLIANCE_PC = 6,
315
  PM_PERFORMANCE_SERVER = 7,
316
  PM_TABLET = 8
317
};
318
319
/* Values for sleep_status and sleep_control registers (V5+ FADT) */
320
321
0
#define ACPI_X_WAKE_STATUS          0x80
322
0
#define ACPI_X_SLEEP_TYPE_MASK      0x1C
323
0
#define ACPI_X_SLEEP_TYPE_POSITION  0x02
324
0
#define ACPI_X_SLEEP_ENABLE         0x20
325
326
/* Reset to default packing */
327
328
#pragma pack()
329
330
#define ACPI_FADT_OFFSET(f)             (u16) ACPI_OFFSET (struct acpi_table_fadt, f)
331
332
/*
333
 * Get the remaining ACPI tables
334
 */
335
336
#include <acpi/actbl1.h>
337
#include <acpi/actbl2.h>
338
#include <acpi/actbl3.h>
339
340
/*
341
 * Sizes of the various flavors of FADT. We need to look closely
342
 * at the FADT length because the version number essentially tells
343
 * us nothing because of many BIOS bugs where the version does not
344
 * match the expected length. In other words, the length of the
345
 * FADT is the bottom line as to what the version really is.
346
 *
347
 * For reference, the values below are as follows:
348
 *     FADT V1 size: 0x074
349
 *     FADT V2 size: 0x084
350
 *     FADT V3 size: 0x0F4
351
 *     FADT V4 size: 0x0F4
352
 *     FADT V5 size: 0x10C
353
 *     FADT V6 size: 0x114
354
 */
355
#define ACPI_FADT_V1_SIZE       (u32) (ACPI_FADT_OFFSET (flags) + 4)
356
#define ACPI_FADT_V2_SIZE       (u32) (ACPI_FADT_OFFSET (minor_revision) + 1)
357
#define ACPI_FADT_V3_SIZE       (u32) (ACPI_FADT_OFFSET (sleep_control))
358
#define ACPI_FADT_V5_SIZE       (u32) (ACPI_FADT_OFFSET (hypervisor_id))
359
#define ACPI_FADT_V6_SIZE       (u32) (sizeof (struct acpi_table_fadt))
360
361
#endif        /* __ACTBL_H__ */